Allied Telesis AT-S62 - Manual (Page 130)

Chapter 8: Port Trunking
Section I: Basic Operations 130
The Port Trunking menu is shown in Figure 35.
Figure 35 Port Trunking Menu
This menu lists any trunks that already exist on the switch.
3. Type C to select Create Trunk.
The Create Trunk menu is shown in Figure 36.
Figure 36 Create Trunk Menu
4. Type 1 to select Trunk ID and, when prompted, enter an ID number
for the trunk of from 1 to 6. A trunk must be assigned a unique ID
number. The default value is the next unused ID number.
5. Type 2 to select Trunk Name and, when prompted, enter a name for
the trunk. The name can be up to fifteen alphanumeric characters. No
spaces or special characters, such as asterisks and exclamation points,
are allowed. Each trunk must have a unique name.
Allied Telesyn Ethernet Switch AT-8524M - AT-S62
Production Switch
User: Manager 11:20:02 02-Jan-2004
Port Trunking
ID Name Ports Method Status
----------------------------------------------------
C - Create Trunk
D - Delete Trunk
M - Modify Trunk
R - Return to Previous Menu
Enter your selection?
Allied Telesyn Ethernet Switch AT-8524M - AT-S62
Production Switch
User: Manager 11:20:02 02-Jan-2004
Create Trunk
1 - Trunk ID ......... 1
2 - Trunk Name .......
3 - Trunk Method ..... SRC/DST MAC
4 - Trunk Ports ......
C - Create Trunk
R - Return to Previous Menu
Enter your selection?