Allied Telesis AT-S62 - Manual (Page 757)

AT-S62 User’s Guide
Section VIII: Web Browser Management 757
The Modify MSTI window is shown in Figure 272.
Figure 272 Modify MSTI Window
c. In the Priority field, enter a new MSTI Priority value. This parameter
is used in selecting a regional root for the MSTI. The range is 0
(zero) to 61,440 in increments of 4,096, with 0 being the highest
priority. For a list of the increments, refer to Table 12 on page 331.
The default is 0.
d. In the VLAN List field, modify the list of VIDs of the VLANs to be
associated with this MSTI. You can add more VLANs or remove
VLANs. You can specify more than one VID at a time (e.g., 2,4,7). If
you remove a VLAN, the VLAN will be associated with CIST.
e. Click Apply.
f. Repeat this procedure to modify more MSTI IDs.
4. To delete an MSTI ID, do the following:
a. In the CIST/MSTI Table section of the menu, click the circle next to
the MSTI ID you want to delete. You can select only one MSTI ID at
a time.
b. Click Remove.
A confirmation prompt is displayed.
c. Click OK to delete the MSTI or Cancel to cancel the procedure.
If you select OK, the MSTI is deleted and VLANs associated with
it are returned to CIST, which has an ID of 0.