Allied Telesis AT-S62 - Manual (Page 704)

Chapter 44: SNMPv3 Protocol
Section VIII: Web Browser Management 704
4. To create an SNMPv3 SecurityToGroup Table entry, click Add.
The Add New SNMPv3 SecurityToGroup Page is shown in Figure
243.
Figure 243 Add New SNMPv3 SecurityToGroup Page
5. In the Security Model field, select the SNMP protocol that was
configured for this User Name.
Choose from the following:
v1
Select this value to associate the User Name with the SNMPv1
protocol.
v2c
Select this value to associate the User Name with the SNMPv2c
protocol.
v3
Select this value to associate the User Name with the SNMPv3
protocol.
6. In the Security Name field, enter the User Name that you want to
associate with a group.
Enter a User Name that you configured in Creating a User Table
Entry on page 683.
7. In the Group Name field, enter a Group Name that you configured in
the Access Table.
See Creating an Access Table on page 696.