Allied Telesis AT-S62 - Manual (Page 73)

AT-S62 User’s Guide
Section I: Basic Operations 73
Enabling or Disabling the Telnet Server
This procedure explains how to enable and disable the Telnet server on
the switch. You might disable the server to prevent individuals from
managing the switch with the Telnet application protocol or if you
intend to use the Secure Shell (SSH) protocol.
To enable or disable the Telnet server, do the following procedure:
1. From the Main Menu, type 5 to select System Administration.
The System Administration menu is shown in Figure 7 on page 59.
2. From the System Administration menu, type 3 to select Console
(Serial/Telnet) Configuration.
The Console (Serial/Telnet) Configuration menu is shown in
Figure 12 on page 71.
3. Type 4 to toggle Telnet Server between Enabled and Disabled. The
default is enabled.
A change to the Telnet server is immediately activated on the
switch.
4. After making the change, type R until you return to the Main Menu.
Then type S to select Save Configuration Changes.