Allied Telesis AT-S62 - Manual (Page 166)

Chapter 12: File Downloads and Uploads
Section II: Advanced Operations 166
3. From the System Administration menu, type 9 to select System
Utilities.
The System Utilities menu is shown in Figure 9 on page 64.
4. For the System Utilities menu, type 2 to select Downloads and
Uploads.
The Downloads and Uploads menu is shown in Figure 44 on page
162.
5. Type 1 to select Download Application Image/Bootloader.
The following prompt is displayed:
Only TFTP downloads are available for a Telnet
access
TFTP Server IP address:
6. Enter the IP address of the TFTP server.
The following prompt is displayed:
Remote File Name:
7. Enter the directory path and file name of the image file or
configuration file that you want to download.
The following message is displayed:
Getting the file from Remote TFTP Server - Please
wait ...
8. If you have not already, start the TFTP server software.
Once the switch has downloaded the image file, this message is
displayed:
File received successfully!
Note
The switch validates the file and then begins the initialization
process of writing the image to flash. The switch will not forward any
network traffic during the initialization process. Once the
management software is initialized, the switch automatically resets.