Allied Telesis AT-S62 - Manual (Page 351)

AT-S62 User’s Guide
Section IV: Spanning Tree Protocols 351
Displaying Port
RSTP Status
The RSTP Port Parameters menu has two selections for displaying a
variety of RSTP port information. The two menu selections are discussed
below.
2 - Display RSTP Port Configuration
This selection displays a menu that contains the current port settings for
the following RSTP parameters:
Port - The port number.
Edge-Port - Whether or not the port is operating as an edge port. The
possible settings are Yes and No.
Point-to-Point - Whether or not the port is functioning as a point-to-
point port.
Cost - Port cost of the port. The default is Auto-Update.
Priority - The number used as a tie-breaker when two or more ports
have equal costs to the root bridge.
3 - Display RSTP Port State
This selection displays a menu that contains the following RSTP
operating status for a port:
Port - The port number.
State - Identifies the RSTP state of the port. Possible states are:
discarding, learning, and forwarding. A state of disabled means the port
has not established a link with its end node.
Role - Indicates the RSTP role of the port. Possible roles are: root,
alternate, backup, and designated.
P2P - Whether or not the port is functioning as a point-to-point port.
Version - Indicates whether the port is operating in RSTP mode or STP-
compatible mode.
Port Cost - Indicates the port cost of the port.