Allied Telesis AT-S62 - Manual (Page 378)

Chapter 19: Multiple Spanning Tree Protocol
Section IV: Spanning Tree Protocols 378
The VLAN-MSTI Association Menu is shown in Figure 119.
Figure 119 VLAN-MSTI Association Menu
The fields in the table are defined below:
MSTI / CIST
Lists the CIST and current MSTI IDs on the switch.
Associated VLANs
Specifies the VIDs of the VLANs associated with the CIST and MSTI
IDs. For instance, referring to the figure above, the VLANs with the
VIDs 7 and 22 are assigned to MSTI 7.
Associating a
VLAN to an
MSTI ID
To associate a VLAN to an MSTP ID, do the following:
1. From the VLAN-MSTI Association Menu, type 1 to select Add VLANs to
MSTI.
The following prompt is displayed:
Enter the MSTI ID [0 to 15] ->
2. Enter the MSTI ID to which you want to associate a VLAN.
A prompt similar to the following is displayed:
Enter the list of VLANs:
3. Enter the VLAN ID of the virtual LAN you want to associate with the
MSTI ID. You can enter more than one VLAN at a time (for example,
2,4,7). To view VIDs, refer to Displaying VLANs on page 410.
Allied Telesyn Ethernet Switch AT-8524M - AT-S62
Production Switch
User: Manager 11:20:02 02-Jan-2004
VLAN-MSTI Association Menu
MSTI/CIST Associated VLANs
------------------------------------------------------------
0
4
1,2
5 6
7 7,22
1 - Add VLANs to MSTI
2 - Delete VLANs from MSTI
3 - Set VLAN to MSTI association
4 - Clear VLAN to MSTI association
U - Update Display
R - Return to Previous Menu
Enter your selection?