Allied Telesis AT-S62 - Manual (Page 170)

Chapter 12: File Downloads and Uploads
Section II: Advanced Operations 170
After you enter a name, the following prompt is displayed:
Enter the list of switches ->
6. Enter the number (Num column in menu) of the AT-8524M switch
where you want to download the configuration file. You can specify
more than one switch at a time (for example, 2,4,5).
Note
An AT-8524M configuration file can be downloaded only onto other
AT-8524M switches. Do not attempt to download the file onto any
other type of enhanced stacking switch.
The following prompt is displayed:
Do you want confirmation before downloading each
switch -> [Yes/No]
7. If you answer Yes to this prompt, the management software prompts
you with a confirmation message before downloading the file to a
switch. If you answer No, the management software does not display
a confirmation prompt before downloading.
The management software begins the download and notifies you
when the download is complete. The configuration file is
automatically designated as the new active boot configuration file on
the switch, and the unit is reset. Once the reset is complete, the switch
will be operating with the parameter settings in the configuration file
that you downloaded onto it.