Allied Telesis AT-S62 - Manual (Page 586)

Chapter 33: Basic Switch Parameters
Section VIII: Web Browser Management 586
Configuring an IP Address and Switch Name
Note
For guidelines on when to assign an IP address, subnet address, and
gateway address to an AT-8524M switch, refer to When Does a
Switch Need an IP Address? on page 57.
To set basic switch parameters for an AT-8524M switch, perform the
following procedure:
1. From the Home Page, select Configuration.
The System page is displayed with the General tab selected by
default, as shown in Figure 194.
Figure 194 General Tab (Configuration)