Allied Telesis AT-S62 - Manual (Page 643)

AT-S62 User’s Guide
Section VIII: Web Browser Management 643
Displaying the Port Mirror
To display the port mirror, do the following:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 195 on page 590
2. From the Monitoring menu, select the Layer 1 option.
The Layer 1 page is displayed with the Port Settings tab selected
by default, as shown in Figure 205 on page 616.
3. Select the Port Mirroring tab.
The Port Mirroring tab is shown in Figure 217.
Figure 217 Port Mirroring Tab (Monitoring)
The information in the tab is described below:
Mirror to Port
The destination port where the traffic is copied to and where the
network analyzer is located.
Ingress Port(s)
The source ports whose ingress traffic is mirrored to the
destination port.
Egress Port(s)
The source ports whose egress traffic is mirrored to the
destination port.
Status
The status of the mirroring feature. If enabled, traffic is being
copied to the destination port. If disabled, no traffic is being
mirrored.