Allied Telesis AT-S62 - Manual (Page 379)

AT-S62 User’s Guide
Section IV: Spanning Tree Protocols 379
The MSTI ID retains any VLANs already associated with it when
new VLANs are added.
4. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.
Removing a
VLAN from an
MSTI ID
To remove a VLAN from an MSTP ID, do the following:
1. From the VLAN-MSTI Association Menu, type 2 to select Delete VLANs
from MSTI.
The following prompt is displayed:
Enter the MSTI ID [0 to 15] ->
2. Enter the MSTI ID to which you want to associate a VLAN.
A prompt similar to the following is displayed:
Enter the list of VLANs:
3. Enter the VLAN ID of the virtual LAN that you want to remove from the
MSTI ID. You can enter more than one VLAN at a time (for example,
2,4,7) To view VIDs, refer to Displaying VLANs on page 410.
A removed VLAN is returned to CIST.
4. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.
Associating
VLANs to an
MSTI ID and
Deleting All
Associated
VLANs
To associate VLANs to an MSTP ID while deleting all VLANs that are
already associated with it, do the following:
1. From the VLAN-MSTI Association Menu, type 1 to select Add VLANs to
MSTI.
The following prompt is displayed:
Enter the MSTI ID [0 to 15] ->
2. Enter the MSTI ID to which you want to associate a VLAN.
3. A prompt similar to the following is displayed:
Enter the list of VLANs:
4. Enter the VLAN ID of the virtual LAN that you want to associate with
the MSTI ID. You can enter more than one VLAN at a time (for
example, 2,4,7) (To view VIDs, refer to Displaying VLANs on page 410.)
The VLANs already associated with the MSTI ID are removed when
the new VLANs are added. The removed VLANs are returned to
CIST.
5. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.