Allied Telesis AT-S62 - Manual (Page 606)

Chapter 34: SNMPv1 and SNMPv2 Community Strings
Section VIII: Web Browser Management 606
Deleting a Community String
To delete a community string, do the following:
1. From the Home page, select Configuration.
The System page is displayed with the General tab selected by
default, as shown in Figure 194 on page 586.
2. Select the SNMP tab.
The SNMP tab is shown in Figure 198 on page 599.
3. Click Configure in the SNMPv1/v2c section of the tab.
The SNMP tab for SNMPv1 and SNMPv2c is shown in Figure 199
on page 601.
4. Click the button next to the community string you want to delete. You
can select only one community string.
5. Click Remove.
A confirmation prompt is displayed.
6. Click OK. The community string is deleted from the switch.
7. To permanently save your change, use the Save Changes button in
the General tab of the System menu. For directions, refer to Saving
Your Parameter Changes on page 577.