Allied Telesis AT-S62 - Manual (Page 249)

AT-S62 User’s Guide
Section III: SNMPv3 Operations 249
The Modify SNMPv3 View Table Menu is shown in Figure 75.
Figure 75 Modify SNMPv3 View Table Menu
4. To modify the Subtree Mask for this view, type 1 to select Set Subtree
Mask.
The following prompt is displayed:
Enter View Name:
5. Enter an existing View Name.
The following prompt is displayed:
Enter View Subtree (OID format/Text Name):
6. Enter Subtree that this view will or will not be permitted to display.
You can enter either a numeric value in hex format or the
equivalent text name. For example, the OID hex format for TCP/IP
is:
1.3.6.1.2.1.6
The text format is for TCP/IP is:
tcp
The following prompt is displayed:
Enter Subtree Mask (Hex format):
7. Enter a Subtree Mask.
This is an optional parameter that is used to further refine the
value in the View Subtree parameter. This parameter is in binary
format.
Allied Telesyn Ethernet Switch AT-8524M - AT-S62
Production Switch
User: Manager 11:20:02 02-Jan-2004
Modify SNMPv3 View Table
View Name ................. tcp
Subtree OID ............... 1.3.6.1.2.1.6
Subtree Mask .............. ff:ff
View Type ................. Included
Storage Type .............. NonVolatile
Row Status ................ Active
1 - Set Subtree Mask
2 - Set View Type
3 - Set Storage Type
U - Update Display
R - Return to Previous Menu
Enter your selection?