Grass Valley VM 3000 System Controllers v.7.4 - Manual (Page 672)

Remote PC
G−2 VM 3000 Installation and Operating Manual
Hardware installation
As shown in Figure G−1, a Remote PC can be installed on the Jupiter network, or on a separate network (e.g., the facility/IT
LAN) connected through a second network interface card (NIC) in the File Server.
If you do connect the File Server to a second network, make sure the two networks are logically separated on separate subnets.
In other words, the devices on the Jupiter network will have IP addresses in one number series and the devices on the facility/IT
network will have IP addresses in another series. For example, the devices on the Jupiter network will typically have IP ad-
dresses in the 192.168.253.x series, while the devices on the facility/IT network might have IP addresses in a range such as
192.168.1.x. In these examples, the subnet mask would be 255.255.255.0 for both class C networks.
Jupiter File Server
Router
Remote PC Extended
Remote PC Extended
Facility LAN Jupiter LAN
Control Module
Ethernet 1
Ethernet 2
Figure G−1.
Control Panel
Control Module