Grass Valley VM 3000 System Controllers v.7.4 - Manual (Page 575)

Software Control Panel Suite
7−11 VM 3000 Installation and Operating Manual
FULL FUNCTION SWITCHER PANEL
Multi−level Status
Multi−level Preset
Level 1 Preset
Level 1 Status
Figure 7−9.
This panel provides full matrix control with breakaway switching capability. Memories allow the user to Save/Recall
up to four sets of 12 Direct Take inputs per output.
To Status a Destination
1. Select the Destination button.
The Categories section will be rewritten to display the categories available to the operator, up to a maximum of 16.
The Function buttons will change from white to gray to indicate they are inactive.
2. Select the desired Category button.
The Entries section will be rewritten to display up to 15 destination buttons. Additional Destination buttons, if avail-
able are accessed by using the scroll buttons.
3. Select the desired Entry button.
The destination entry will be entered into the Destination display and the level 1 status will be shown in the Status
window. In addition, the status for each level will be shown in the “Levels” window with yellow lettering; the name
of each level will be shown on the buttons. If more than four levels exist a scroll button will appear.