beautypg.com

Grass Valley VM 3000 System Controllers v.7.4 User Manual

Page 200

background image

Hardware Installation

2−128

VM 3000 Installation and Operating Manual

Note 1: When controlled by Jupiter, SlimLine units display green characters, red tally indicators, and one tally level
only. With the Universal Display, only the triple display mode is supported (i.e., 3 segments of 8 characters each,
plus tally indicators).

Note 2: Because the Cat 5 Ethernet cable connecting the controller to the UMDs carries power, the maximum rec-
ommended length is 15 m (50 ft). This is a standard (pin−for−pin) Ethernet cable, not a crossover cable

Note 3: The RP 1/2/3 and RP 1/2/3 C series UMDs (which are no longer available) are installed and configured
similarly to the SlimLine series. The main difference is that the RP 1/2/3 units are daisy−chained directly to a VM/
SI 3000 serial port.

Note 4: For information about TSL UMDs, see Appendix T.

This manual is related to the following products: