Grass Valley VM 3000 System Controllers v.7.4 - Manual (Page 369)

Configurator Delegation Groups
5−159 VM 3000 Installation and Operating Manual
Delegation Groups
Configuring the MC 3020D Group Delegation Panel
1
Delegation Group
Name
MCS
2 STU
3 ENG
4 TAPE
Figure 5−138. Delegation groups menu (example).
Password 5−17
Network Description 5−22
Serial Protocol 5−25
Switcher Description 5−31
Switcher Input 5−44
Switcher Output 5−51
Control Panel Sets
Level set 5−55
Input set 5−58
Output set 5−76
Override set 5−98
Sequence set 5−101
Category set 5−103
MPK Devices 5−109
Machines 5−140
Protocol Dependent 5−143
Machine Control 5−146
Delegation Groups
TCS−1 Device Codes 5−166
Party Line 5−167
Status Display Header 5−170
VGA Status Display 5−171
Tally 5−172
Path Finding 5−194
Exclusion 5−208
Y Line 5−209
The MC 3020D Group Delegation Panel can be used to restrict control of a specific VTR to a particular control panel or panels.
Note that the MC 3020D does not actually connect a control panel to a machine; rather, it allows the connection to be made
using the normal machine linkage procedures already described on page 5−149.
The Delegation Groups menu (Figure 5−138) is used to establish the names of the desired machine control panels or groups
of panels. The four groups shown in this example correspond to the control panels outlined in Figure 5−139. The order of
these entries will be the order of the buttons on all MC 3020D Machine Delegate Panels in the system (Figure 5−140).