Grass Valley VM 3000 System Controllers v.7.4 - Manual (Page 392)

Configurator Tally
5−182 VM 3000 Installation and Operating Manual
Indirect Connection to Transmitter
Please see Figure 5−162.
There are two types of entries on this table: an unqualified output entry and MCS_TLY entries.
Unqualified output
This is the name (“XMIT”) of the routing switcher output leading to the transmitter (or the name of the output leading
to the primary program line). All sources switched to this output will be tallied. The rest of the row remains blank. There
can be more than one unqualified output if desired.
Saturn (“MCS_TLY”) entries
Entries are similar to those already described (page 5−184) except for the last two columns. Since the master control
switcher is connected indirectly to the transmitter (by re−entry through the routing switcher), each entry must include
the Name of the MI 3040/T and the relay Number associated with the master control switcher’s tally light.