Grass Valley VM 3000 System Controllers v.7.4 - Manual (Page 560)

Control Panel Operation MC 3020D
6−140 VN 3000 Installation and Operating Manual
MC 3020D Delegate Panel Operation
Figure 6−169. MC 3020D Delegate Panel with example labels.
GM
CONF
C
CONF
B
CONF
A
EDIT
ENG
3
ENG
2
ENG
1
VTR
C
VTR
B
MCS ST A ST B
VTR
A
NEWS QC ST C ST D
All
groups
RMT
No
groups
ST E
Installation of this panel is shown on page 2−75 (panel−per−machine arrangement) and page 2−76 (central control
arrangement).
The panel is used to delegate control of a machine to a single remote panel, a group of panels, multiple groups, or to all remote
panels. In the panel−per−machine arrangement, only the button for the desired group need be pressed. In the central control
arrangement, the group is selected on the MC 3020D and the desired machine on the CP 3021 Expansion Panel.
If no group is selected, then control remains with the local control panel (on the machine itself).
Note that the MC 3020D does not actually connect a control panel to a machine; rather, it allows the connection to be made
using the normal machine linkage procedures already described on page 5−149.
Configuration of the MC 3020D is described in Delegation Groups, starting on page 5−159. An example of a delegation and
linkage sequence is described on page 5−163.