Grass Valley VM 3000 System Controllers v.7.4 - Manual (Page 283)

Configurator CP Input Set
5−73 VM 3000 Installation and Operating Manual
Figure 5−57. Entries for CP 3832 (configured as balanced split panel) with 2nd CP 3832 used as source expansion panel.
16 default 16 VTR12 VTR12
17 default 17 VTR13 VTR13
48 default 48 VCR12 VCR12 †
†
†
CP 3832 (configured as
balanced split panel)
Input button 1
Input button
17
Input button 16
§ Input button 48
§
CP 3832
IN
OUT
default
default 1
CP Input Set − 3832−IN
2
1
2
Category Entry
CAM1
CAM2
Input
CAM1
CAM2
Mnemonic
†
†
Logical
17. To close the table, click OK.
18. Click on “File > Save” to save the table.
The change will apply to all control panels that use the same Input Set. For the system shown on page 5−109, it would
affect all panels in the system since all of them use “KXYZ−INP” as the Input Set.
19. Select the next table for editing. When finished, validate, compile, and activate the configuration set. (See page 5−13
if you need more information.)
§
When two or more CP 3832 panels are used, button assignments are also determined by order of MPK table entries. See
page 5−133.
† Data not used, but entry must be present to satisfy compiler. Each number in this column must be unique.