Grass Valley VM 3000 System Controllers v.7.4 - Manual (Page 400)

Configurator Tally
5−190 VM 3000 Installation and Operating Manual
CONFIGURATION FOR SYSTEMS WITH NON−SATURN MASTER CONTROL SWITCHER
Figure 5−166. Tally dependencies table for systems with
non−Saturn master control switcher (Figure 5−167).
1
Tally Dependency
Tally Device Opto Logical Output
XMIT
Tally
2 TALLY1 2 MCS1 TALLY1 /4
3 TALLY1 3 MCS2 TALLY1 /4
4 TALLY1 4 MCS3 TALLY1 /4
5 TALLY1 5 MCS4 TALLY1 /4
6 TALLY1 6 MCS5 TALLY1 /4
7 TALLY1 0 PROD1 TALLY1 /3
8 TALLY1 1 PROD2 TALLY1 /3
The Tally Dependency table shown above (Figure 5−166) corresponds to the system shown in Figure 5−167.
This table is similar to that already described, except that it shows the required connections from the non−Saturn master con-
trol switcher to the MI 3040/T opto−isolators.
Note: in this discussion, “non−Saturn” also means “non−MCS 2000.”