Grass Valley VM 3000 System Controllers v.7.4 - Manual (Page 296)

Configurator CP Output Set
5−86 VM 3000 Installation and Operating Manual
Central control arrangement. In this application, the MC 3020D Output Set is actually a list of machines and is used
to assign each machine to a particular button of the CP 3021D Expansion Panel (Figure 5−64). The name of the MC
3020D Output Set is then entered on the MPK Devices table (Figure 5−141 on page 5−162). The order of entry on the
Output Set table will correspond to the order of buttons on the CP 3021. For example, the machine listed in row 1 of
the table will be assigned to the first button of the first expansion panel (the first expansion panel on the ribbon wire).
1
Output Set — MC3020D−OUT
Machine Name
VT01
2 VC01
3 VC02
Figure 5−64. CP Output Set used to establish machine names
for centrally−located MC 3021D (example). The correspond-
ing system is shown on page 5−161. See also page 2−76.
The source of these names is the Machines table (page 5−140).