Memory, Saving a salvo setup – Grass Valley VM 3000 System Controllers v.7.4 User Manual
Page 591
Software Control Panel Suite
7−27
VM 3000 Installation and Operating Manual
4.
Select the next desired Source Entry button, then Destination Entry buttons, etc.
5.
Select Take to execute the switch.
Memory
The memory window allows the user to save or recall up to four sets of Salvo setups.
Note: Saved salvos for a given configuration set may not be valid with other configuration sets. For example, if
a preset calls for input ”VTR1” and “VTR1” does not appear in a set downloaded at a later time the preset will fail.
Saving a Salvo Setup
1.
Follow the Multiple Source/Destination Switching (Salvo) procedure above to set up the salvo selections to be
saved.
2.
Select the Memory button.
The Memory button label color will change from black to yellow and the Memory window will appear.
Figure 7−17.
3.
Select an unassigned Memory location (1, 2, 3, or 4).
The label will change from black to yellow.