Grass Valley VM 3000 System Controllers v.7.4 - Manual (Page 329)

Configurator MPK Devices
5−119 VM 3000 Installation and Operating Manual
MC 3020D DELEGATE PANEL ENTRY
Table entries for this panel are discussed on page 5−160.
MC 3020L LINKAGE PANEL ENTRY
MPK Devices
TAPEMCL MC−3020L 00000031 LINKMACH LINKPANL 1
MPK
Expansion
Pass
Board Port
6
Address Input Sets Output Sets Level Set Overide Set Sequence Set Devices word In Panel Out Panel
SI1
Figure 5−95. Entry for MC 3020L. The corresponding system is shown on page 2−73.
Davice
Type
Hardware installation of the MC 3020L has already been described (page 2−72).
The MPK Devices table must be used to identify each MC 3020L in the system. A name for the MC 3020L is entered along
with the name of a CP Input Set that is actually a list of the machines assigned to the MC 3020L’s main panel. Also entered
is the name of a CP Output Set that is actually a list of the control panels assigned to the expansion panel.
For information concerning creation of the CP Input Set (machine list), see page 5−62.
For information concerning creation of the CP Output Set (control panel list), see page 5−76.
Important: The system automatically defaults to “No expansion panel.” “No” (unchecked) is the correct entry,
even though the MC 3020L is being operated with an expansion panel (a CP 3021).