Grass Valley VM 3000 System Controllers v.7.4 - Manual (Page 456)

Control Panel Operation CP 3800
6−36 VN 3000 Installation and Operating Manual
MULTIPLE DESTINATION MODE (CONT’D)
Entering Single Destination Mode
This mode displays multi−level status for a single destination.
1. Press the DEST button.
The DEST button will illuminate in green.
2. Select the destination to be controlled:
— If the desired destination has already been assigned to a soft key, select the key.
— If the desired destination has not been assigned to a soft key, press DEST again. Button should now be flash-
ing red. Select a soft key that is lit high green (i.e., one that is front−panel assignable). Select a category and
number; press TAKE. (If the button has already been assigned you will need to press TAKE again.) Then go
back to Step 1.
The DEST button will remain illuminated in green to indicate single destination mode.
3. For operating instructions while in the single destination mode, refer to page 6−37.
4. To return to Multiple Destination mode, press the green DEST button a second time.