Grass Valley VM 3000 System Controllers v.7.4 - Manual (Page 349)

Configurator MPK Devices
5−139 VM 3000 Installation and Operating Manual
Single Bus Status Only (Stand−alone) (“CP−3810L”)
In this mode, the panel is configured to status a single output. No other panel is associated with the panel. and there is no
switcher control. An example entry is shown in Figure 5−123.
MPK bus
VM 3000
“VM1”
CP 3810
“CP3810”
Levels for 1
destination
Figure 5−122.
CP3810 CP−3810L 2 00000044 3832−IN VT01 KXYZ−LEV 1
MPK Devices
MPK
Expansion
Pass
Board
VM1
Port Address Input Sets Output Sets Level Set Overide Set Sequence Set Devices word In Panel Out Panel
Figure 5−123.
Device
Type
Select “CP−3810L” as the device Type. In the Output Set column, enter the name of the output to be statused.
For operating instructions, see page 6−126.