beautypg.com

Cp 3830 dual configuration, Dedicated output panel, Figure 5−106 – Grass Valley VM 3000 System Controllers v.7.4 User Manual

Page 341

background image

Configurator

MPK Devices

5−131

VM 3000 Installation and Operating Manual

CP 3830 DUAL CONFIGURATION

Dedicated Output Panel

Dual CP 3830 panels can be configured so that the second panel is always used for output selection. The output panel’s buttons
will glow amber.

MPK bus

VM 3000
“VM1”

CP 3830
“CP3830IN”

CP 3830
“CP3830OU”

Dedicated
output panel

Figure 5−106.

CP3830IN

CP−3830

2

00000042

CP3830OU

CP−3830

2

00000043

1

MPK Devices

MPK

Expansion

Pass

Board

VM1

Port

Address

Input Sets

Output Sets

Level Set

Overide Set

Sequence Set

2

VM1

KXYZ−INP

KXYZ−OUT

KXYZ−LEV

Devices

word

In Panel

Out Panel

KXYZ−LEV

KXYZ−OUT

Figure 5−107. Entry for system shown in Figure 5−106.

CP3830IN

Device

Type

Do the following to connect two CP 3830 panels together with one being an input panel and the other being an output panel:

1.

The Expansion box must be unchecked for both the input and output CP 3830.

2.

The Output Set should be the same for both panels. The compiler requires the LEV SET field to be defined.

The CP 3830 input panel can be independent of the output CP 3830. The output CP 3830 can still change the output
for the input CP 3830 by selecting the new output name and doing a TAKE.

3.

The CP 3830 that is defined as the output panel must have the name of the associated CP 3830 selected in the “In Panel”
field (e.g., CP−3830IN).

This manual is related to the following products: