Grass Valley VM 3000 System Controllers v.7.4 - Manual (Page 290)

Configurator CP Output Set
5−80 VM 3000 Installation and Operating Manual
If you want to use a factory default category set (as shown on pages 5−82 and 5−83), leave the Category Set as “Default.”
If you wish to associate an existing Output Set with a different category set than the one originally assigned, see page
5−107.
6. Click on one of the CP types:
cp2002B
cp3000
cp3008
cp3800
cp3808
cp3830
cp310
cp320
cp328
cp3310
cpsatrn
†
emem
mc3020D
mc3020L
serial
umd3a
cp3824
cp3832
Create Output Set
Figure 5−61. .
•
If CP 2002B, CP 3000, CP 3008, or CP 3800 is selected, clicking on “Apply” and “Open Table” will open up
a blank version of the table shown in Figure 5−62. These are 20−category panels. Press the INSERT button to
start building the table. Then skip to Step 9.
•
For CP 3030 panels, select type “CP 3000.” Clicking on “Apply” and “Open Table” will open a blank version
of the table shown in Figure 5−62. These are 20−category panels. Press the INSERT button to start building
the table. Then skip to Step 9.
•
CP 3809 and CP 3810 expansion panels do not have a separate CP Output Set. They use the Output Set as-
signed to the main panel associated with them.
•
If CP 320, CP 328, or CP 3808 is selected, clicking “Apply” and “Open Table” will open a blank version of
the table shown in Figure 5−62 . These are 16−category panels. Press the INSERT button to start building the
table. Then skip to Step 10.
•
If CP 3824 is selected, clicking “Apply” and “Open Table” will open a blank version of the table shown in
Figure 5−62 . This is a 15−category panel. Press the INSERT button to start building the table. Then skip to
Step 10.
•
For CP 3830 or CP 3830P panels, select type “CP 3830.” Clicking on “Apply” and “Open Table” will open a
blank version of the table shown in Figure 5−62. These are 12−category panels. Press the INSERT button to
start building the table. Then skip to Step 10.
† Not used. Saturn configuration instructions are described in the Saturn Master Control Switcher Installation and Operat-
ing Manual.