Grass Valley VM 3000 System Controllers v.7.4 - Manual (Page 445)

Control Panel Operation CP 3010
6−25 VM 3000 Installation and Operating Manual
Permanent Assignment of Outputs to the TAKE Keys
Outputs can also be assigned permanently, as described on page 5−77.
Note: If an output is permanently assigned to a CP 3010 button, but that output is later removed from the CP Output
table, and the new set downloaded, the CP 3010 will continue to display the name of the output until the output
is manually deleted. To do this, select an output that is not defined and press the appropriate TAKE key on the
expansion panel.
Machine Control
When the CP 3010 is used as an expansion panel for a CP 3000 control panel, Start/Stop machine control can be provided
by the and > buttons.
Configuration for machine control applications and the method by which machines are assigned to the panel are discussed
on page 5−156.