Grass Valley VM 3000 System Controllers v.7.4 - Manual (Page 578)

Software Control Panel Suite
7−14 VM 3000 Installation and Operating Manual
Audio Modes (Venus Special Stereo Switching)
The Full Function Switcher Panel has the capability of controlling Venus Audio Modes, which are Normal, Mix, and
Reverse. These changes are made to individual levels prior to completing a switch by pressing the TAKE button.
Note: Audio switching mode can only be used if an appropriately configured Venus switcher is connected.
To perform a special stereo switch:
1. Select a source. The source mnemonic will appear in the Preset window.
2. Select the Audio Modes key. The button will turn red and the Levels subwindow will show the current audio mode
status.
Figure 7−10.
In Figure 7−10, the left audio channel is set to “Mix.”
3. Toggle the left channel to the desired mode by pressing the LEFT level key:
D
NORMAL−use left audio for this channel
LEFT LEFT (Left signal on Left channel)
D
MIX− Mix left and right on this channel