2−109); however – Grass Valley VM 3000 System Controllers v.7.4 User Manual
Page 168
Hardware Installation
2−96
VM 3000 Installation and Operating Manual
SI 3000
MI 2003 Machine Interface
Sony BVH−1000
BVH−1100
MI 1002 Machine Interface
Ampex VPR−2
MI 1003 Machine Interface
(See Figure 2−105 for alternate
interface information)
Ampex AVR−3
MI 8 Machine Interface
(See Figure 2−105 for alter-
nate interface information)
Other parallel−control VTRs
Note 1: Only odd numbered ports of VM/SI 3000
can be used for connection to TCS 1 controls.
Note 2: Only even numbered ports of VM/SI 3000
can be used for connection to MI interfaces.
Note 3: MI buses can be extended to additional in-
terfaces if desired, up to a recommended maxi-
mum of eight.
Figure 2−109. Connection to older−model VTRs through TCS 1 interfaces.
Serial (TCS1−MI) bus
Serial (TCS1−MI) bus
Serial (TCS1−MI) bus
Serial (TCS1−MI) bus
See interface manual.
VM/SI 3000 9−pin to TCS 1 37−pin
cable (see page 2−98)
Sync ref.
See pg.
TCS 1 Control panel.
See page 2−95.
Serial
(TCS1−CP)
bus
Cable varies. Contact Grass Valley.