Connection to vtrs and other machines, Interface selection guide – Grass Valley VM 3000 System Controllers v.7.4 User Manual
Page 161

Hardware Installation
2−89
VM 3000 Installation and Operating Manual
Connection to VTRs and Other Machines
INTERFACE SELECTION GUIDE
Use this chart as a starting point for installation of VTRs and other machines which are to be controlled by the Jupiter system.
Sony
Ampex
AVR−3
VM/SI 3000 with MI−1003.
†
Interface required
VTR
Alternate interface
VM/SI 3000 with MI−3040.
Figure 2−105.
VPR−2
VM/SI 3000 with
MI−1002.
†
VPR−3
VPR−6
VPR−80
VPR−300 series
...and other late−model se-
rial control machines
VM/SI 3000.
None
Philips
BCB−35
BCB−60/65/70/75
DCR−10/18/20/28
DCR−34/35
DCR−100/300/500
PCB−2600/2650/2800
VM/SI 3000.
None
Betacart
VM/SI 3000 with MI−8B
†
and Sony IF−10.
See Fig. 2−110 on pg.
VM/SI 3000 with MI−3040
and Sony IF−10.
See page 2−100.
VM/SI 3000 with MI−24B
†
and Sony IF−10.
OR
OR
VM/SI 3000 with BBC−2300.
LMS
VM/SI 3000 with MI−3040
and Sony IF−10.
See page 2−100.
None
BVH−1000
BVH−1100
VM/SI 3000 with
MI−2003.
†
BVH−2000
BVH−2500
BVW−10
BVW−40
BVU−800
...and other late−model serial
control machines
VM/SI 3000
None
Other parallel
control VTR,
audio cart, etc.
VM/SI 3000 with MI−3040.
VM/SI 3000 with MI−8B.
†
†
Discontinued item—
no longer manufac-
tured by Grass
Valley.
VM/SI 3000 with MI−3040.
§
See page 2−100.
§
No speed control
using MI−3040
with this VTR.
VM/SI 3000 with MI−3040.
§
See page 2−100.