Grass Valley VM 3000 System Controllers v.7.4 - Manual (Page 531)

Control Panel Operation CP 3832 / 3864
6−111 VM 3000 Installation and Operating Manual
Destination Expansion Operation
For destination expansion applications, such as illustrated in Figure 6−141, operation is very similar to that described on page
6−106. Configuration will be slightly different (since neither panel in Figure 6−141 is being used in the “split” mode).
In terms of operation, only the Main panel’s control buttons (“LEVEL,” “TAKE,” etc.) are normally used. On the expansion
panel(s), the control buttons are not illuminated and the word “Destnatn” always appears in the Preset window.
VTR1 VTR2 VTR3 VTR4
VTR5 VTR6 VTR7 VTR8
CAM1 CAM2 CAM3 CAM4
CAM5 CAM6 CAM7 CAM8
BLACK BARS TONE CG−1 SILE
NCE CG−2 CG−3 CG−4
EBS1 EBS2 TEST1 TEST2 FDL1 FDL2 FDL3 FDL4
STU1 STU2 STU3 STU4
EDIT1 EDIT2 EDIT3 EDIT4
PST PGM AIR KEY1
KEY2 BACK
UP
BY
PASS
XMIT
VTR1 VTR2 VTR3 VTR4
VTR5 VTR6 VTR7 VTR8
Level Menu Clear
Chop Lock/
Prot
Pre−
set
Take
CURRENT
PRESET
DESTINATION
AUX1 AUX2 AUX3 AUX4
AUX8 AUX7 AUX6 AUX5
Level Menu Clear
Prot/
Lock Pre−
set
Take
CURRENT
PRESET
MONITOR1 STU1 STU2 STU3 STU4
EDIT1 EDIT2 EDIT3 EDIT4
PST PGM AIR KEY1
KEY2 BACK
UP
BY
PASS XMIT
VTR1 VTR2 VTR3 VTR4
VTR5 VTR6 VTR7 VTR8 AUX1 AUX2 AUX3 AUX4
MON1 MON2 MON3 MON4
DESTNATN
VTR−001
All source buttons glow green
All destination buttons glow amber
Illuminated control buttons
indicate Main panel
“DESTNATN” indicates
expansion panel
MONITOR1
Figure 6−141. CP 3832 used as destination panel for 64 x 32 control station.