Grass Valley VM 3000 System Controllers v.7.4 - Manual (Page 580)

Software Control Panel Suite
7−16 VM 3000 Installation and Operating Manual
Presets
Direct Take Preset Assignments
The Presets Function allows the user to save frequently−used sources in a 12−button Direct Take Presets window. Four
of these Direct Take setups may be saved.
1. If the Functions buttons are grayed out, select the Source button.
All buttons in the Functions section are toggle function, i.e. select to turn On and select again to turn Off.
2. Select the Presets button.
The Presets button label color will change from white to red and the Direct−Take Presets window will appear.
Figure 7−11.
3. Select the Load button.
The button label color will change from black to yellow indicating that sources may be assigned to the Direct Take
buttons. If the Unload function was active it will be deactivated, indicated by the label color changing from yellow
to black.
4. Select the desired Source Category button.
The Source Entries section will be rewritten to display the source buttons.