Section 16 - physical remapping utility, Section 16 − physical remapping utility, Menus – Grass Valley VM 3000 System Controllers v.7.4 User Manual
Page 635: File
16−1
VM 3000 Installation and Operating Manual
Section 16 − Physical Remapping Utility
This application allows the user to change individual or ranges of physical inputs and outputs, mapping around failed cross-
points or entire crosspoint boards.
This utility can be used in conjunction with the Physical Diagnostics Utility. The user must be logged into the network for
this utility to function.
Note: The Physical Remapping Utility does not support remote PC operation or AccuSwitch applications.
Figure 16−1.
The window above is displayed when the application is started. Select either the Input or Output check button for different
I/O type mapping, then select a switcher and level (as defined in the Switcher Description Table). Select either the “Single
Port” or the “Whole Board” radio buttons depending on whether individual or ranges of pages are to be changed.
Menus
File
Select Exception Table − Allows creation of a new Input or Output Exception Table or reuse of an existing table.