Protocol dependent devices, Protocol dependent, Machine control – Grass Valley VM 3000 System Controllers v.7.4 User Manual
Page 353: Delegation groups

Configurator
Protocol Dependent Devices
5−143
VM 3000 Installation and Operating Manual
Protocol Dependent Devices
hexadecimal
Protocol Dependent Devices
Device
Board
Port
Address
1
2
VT04
TCS1−MI
SI1
4
40
VT10
ES−Mch
SI1
10
00001000
Figure 5−126. Protocol Dependent Devices
table for system shown on page 5−145.
Name
Device
Type
Password
Control Panel Sets
Level set
Machines
Protocol Dependent
Machine Control
TCS−1 Device Codes
Status Display Header
Tally
Exclusion
This table is used for initial entry of special protocol control devices and machines using “Alamar” (Philips Broadcast Au-
tomation), “ESbus,” and “TCS” protocols. Data entered here is automatically made available on the Machine Control table.
Important: Row numbers on Jupiter tables are used as the “logical” numbers for devices. Changing the row num-
ber of an existing device (by inserting/deleting a device in the middle of the table, for example) will disrupt con-
trol of the machine, requiring linkages to be re−established. One way to avoid this interruption is to add new de-
vices at the end of tables.
§