Grass Valley VM 3000 System Controllers v.7.4 - Manual (Page 129)

Hardware Installation
2−57 VM 3000 Installation and Operating Manual
CP 3800 Eight Character Control Panel
Installation of this panel is shown on page 2−50.
Figure 2−68.
1 2 3 4 5 6 7 8
Clear
Lock/
Prot Dest Level
Over
ride SEQ Audio Menu
VTR
1
CG
2
NET
3 SAT A
B EMER
REM
6
CAM
5
VCR
4
Undo
Film
7
Patch
8
STU
9 Frame C
D STILL MISC
TEST
0 AUX Take
The CP 3800 is a universal, eight−character mnemonic, switcher and machine control panel.
Note: the CP 3800 cannot be run from an SC 3000. It can only be connected to a VM/SI 3000.
This control panel uses an eight−character “CP 3800” type CP Level Set (page 5−55), CP Input Set (page 5−58) and CP Output
Set (page 5−76). These sets, and others, are assigned to the panel using the MPK Devices table (page 5−109). and if used for
machine control, the Machine Control Devices table (page 5−140). It can also use custom CP Category Sets (page 5−104).
For operating instructions, see page 6−27.