Grass Valley VM 3000 System Controllers v.7.4 - Manual (Page 279)

Configurator CP Input Set
5−69 VM 3000 Installation and Operating Manual
13. DD (“Diamond”) − serial
For the Serial table, you will need entries similar to those shown in Figure 5−48.
Figure 5−48. Diamond Serial Input Set menu.
1
Input Set — ASC−INP
2 1
2
Entry
BARS
TONE
Input
3
3
TC
4
5 4
5 6
6
VT03
7
7 8 VT05
VT01
VT02
VT04
48 47 ESS
0
Logical
There are no category choices, since the DD identifies inputs and outputs by number only.
a. Specify the desired Entry (unit) number. This can be done by double−clicking on the desired “Entry” field and
typing the number. Press ENTER.
Each Entry number corresponds to a button on the DD Aux Bus. The buttons are numbered 0−47.
b. Select the name of the router Input that you want assigned to the first button on the DD Aux bus. The source of
these names is the Switcher Input table (page 5−44).
c. Enter the next Entry number and Input name, up to the maximum of 48 rows.
When finished, skip to Step 17.