Grass Valley VM 3000 System Controllers v.7.4 - Manual (Page 314)

Configurator CP Category Set
5−104 VM 3000 Installation and Operating Manual
cp2002B IN
cp2002B OUT
cp3000 IN
cp3000 OUT
cp3800 IN
cp3800 OUT
cp3808 IN
cp3808 OUT
cp3824 IN
cp3824 OUT
cp3830 IN
cp3830 OUT
cp310
OUT
cp320 IN
cp320 OUT
cp328 IN
cp328 OUT
cp3310 IN
cp3310 OUT
cpsatrn IN
cpsatrn OUT
†
emem IN
emem OUT
serial IN
serial OUT
umd3a IN
umd3a OUT
Figure 5−81. CP category set create menu.
This menu is used to enter the name of the set and select the set type.
When finished, a blank version of the table shown in Figure 5−80 will appear.
Guidelines for using the editor are found on page 5−3.
Each CP 3000, CP 3800, or Saturn In Category Set can contain up to 20 category mnemonics; if less than 20 categories are
entered, the remaining category keys will be inoperative.
†
“cpsatrn OUT” not used. Detailed Saturn configuration instructions are described in the Saturn Master Control Switcher
Installation and Operating Manual.