Grass Valley VM 3000 System Controllers v.7.4 - Manual (Page 535)

Control Panel Operation CP 3832 / 3864
6−115 VM 3000 Installation and Operating Manual
AUDIO SWITCHING MODE (VENUS SPECIAL STEREO SWITCHING)
The CP 3832/64 has the capability of controlling Venus Audio Modes, which are Normal, Mix, and Reverse. These changes
are made to individual levels prior to completing a switch by pressing the TAKE button.
Note: Audio switching mode can only be used if an appropriately configured Venus switcher is connected.
To perform a special stereo switch:
1. Enter Preset mode by pressing PRESET. The button will flash red.
2. Select a source. The source mnemonic will appear in the Preset window.
3. Press MENU.
The MENU button will light in red and the Preset window will display the level mnemonic. The Current window will
show the audio mode for the left channel.
In Figure 6−144, the left audio channel is set to “Normal.”
Figure 6−144.
Level Menu Clear
Prot/
Lock Pre−
set Take
CURRENT
PRESET
NORMAL
LEFT
4. Toggle the left channel to the desired mode by pressing PRESET:
D
NORMAL − Use left audio for this channel
LEFT LEFT (Left signal on Left channel)
D
MIX − Mix left and right on this channel
LEFT
RIGHT
LEFT (Left + Right signals on Left channel)
D
REVERSE − Cross opposite channel signal over to this channel
RIGHT
LEFT (Right signal on Left channel)