Grass Valley VM 3000 System Controllers v.7.4 - Manual (Page 234)

Configurator Network Description Table
5−24 VM 3000 Installation and Operating Manual
5. Press TAB to advance to the board Type box. A pop−up menu will list the possible board types. Select a type based on
hardware and application:
Board Application
“Type”
Entry Notes
VM 3000 Control processor VM
CM 4000
AccuSwitch processor AS
Jupiter XPress (“Snowbird”) processor SB
SI 3000 Control processor SI
Saturn AAP Analog audio processor AA
Saturn AVP Analog video processor AV
Saturn CP Control Panel CP
Saturn DAP Digital audio processor DA
Saturn DVP Digital video processor DV
Saturn HDVP High definition video HD
PC Software control panel suite PC
6. Select the Address box and enter the Ethernet hardware address for the board.
For the VM/SI 3000 and other rack mount boards, the address is shown on the back panel.
Use the Backspace key to erase.
7. If the board is redundant, enter the address of the second unit.
Even though they have the same name, the two boards will have different addresses on this table.
A redundant VM 3000 installation is shown on page 2−4; a redundant SI 3000 installation is shown on page 2−93.
8. To delete a board, click on the row number box and press DELETE.
9. To close the table, click OK.
10. Click on “File > Save” to save the table.
11. Select the next table for editing. When finished, validate, compile, and activate the configuration set. (See Validating,
Compiling and Activating the Configuration Set on page 5−13 if you need more information.)