Grass Valley VM 3000 System Controllers v.7.4 - Manual (Page 100)

Hardware Installation
2−28 VM 3000 Installation and Operating Manual
NVISION DISTRIBUTION SWITCHER
Certain late−model NVISION switchers can be controlled using the hardware connections shown in Figure 2−34. The proto-
col setting is: 38400 baud, 8 data bits, odd parity, 1 stop bit.
Figure 2−34. Connection to NVISION distribution switcher
See page 2−109 for a description of this cable
NVISION protocol
ESbus port
NVISION switcher
VM 3000
LAN
See pg
2−46
House time
code
(optional).
See pg.
2−110
Odd serial port
PRO−BEL DISTRIBUTION SWITCHER
Pro−bel Eclipse (SW.P.02) switchers can be controlled using the hardware connections shown in Figure 2−35. The protocol
setting is: 38400 baud, 8 data bits, odd parity, 1 stop bit.
Note: On the Serial Protocol table (page 5−25) select the “Alpha Imag.” protocol for this switcher.
Figure 2−35. Connection to Pro−bel distribution switcher.
AlphImag protocol
Pro−bel Eclipse switcher
VM 3000
LAN
See pg
2−46
House time
code
(optional).
See pg.
2−110
Refer to the manual
supplied with the
Pro−Bel router for
pinout information.
See Figure 2−33 for
pinout information.
Odd serial port