Grass Valley VM 3000 System Controllers v.7.4 - Manual (Page 231)

Configurator Passwords
5−21 VM 3000 Installation and Operating Manual
3. Select the password you want to change.
Guidelines for using the editor are found on page 5−3.
4. Type in the revised password. The password must consist of six numbers.
5. Use TAB (or click) to select the Level field. Type in the revised password level (if any). This must be a number from
00 to 99.
In this example, pressing Enter at this point will create a row for another password. (If left blank, the new row will be
deleted automatically when the table is saved.)
6. When editing is complete, select “OK.” To save the changes, select “File > Save.”
SETTING PASSWORD LEVELS FOR CONTROL PANELS
Please see page 5−115.
SETTING PASSWORD LEVELS FOR SWITCHER OUTPUTS
Please see page 5−53.
FORCE UNPROTECT/UNLOCK
Force unprotect/unlock is available as a file server utility (page 11−1) and with the VGA Status Display (page 6−143).
Force unprotect/unlock is not available from party line−type control panels.