Section 12 - logger and log viewer, Section 12 − logger and log viewer, Running the jns logger – Grass Valley VM 3000 System Controllers v.7.4 User Manual
Page 619
12−1
VM 3000 Installation and Operating Manual
Section 12 − Logger and Log Viewer
Figure 12−1.
The JNS Logger and Log Viewer are used to create, view, and print log files of Jupiter LAN activity. These files can be useful
for troubleshooting.
The Log Viewer will display Jupiter LAN activity as it occurs and record errors detected by the Jupiter Network Suite.
The functionality of the JNS Log Viewer is similar to that of the Jupiter Network Interface Application (JNIA) Log Viewer;
however, the user interface is very different. (Although the JNS Logger replaces the JNIA Log Viewer, the JNIA Log Viewer
is still available on Windows 95 platforms.)
Logger and Log Viewer require installation of the Jupiter Network Suite.
Note: The log file will be saved on whatever computer is executing the Log Server application. This computer can
be identified by going to “JNS Control Console > JNS Servers” and looking for the “Log” button. If the word “Lo-
cal” appears above the Log button, you are at the computer with the log file.
Running the JNS Logger
Select “Start > Programs > Jupiter Network Suite > Logger.”