Dell PowerEdge VRTX - Manual (Page 788)

788 Quality of Service (QoS) Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\QoS.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
qos map dscp-queue
Use the qos map dscp-queue Global Configuration mode command to
configure the DSCP to queue map. Use the no form of this command to
restore the default configuration.
Syntax
qos map dscp-queue dscp-list to queue-id
no qos map dscp-queue [ dscp-list ]
Parameters
• dscp-list—Specifies up to 8 DSCP values, separated by spaces. (Range: 0–
63)
• queue-id—Specifies the queue number to which the DSCP values are
mapped.
Default Configuration
The default map for 8 queues is as follows.
Command Mode
Global Configuration mode
Example
The following example maps DSCP values 33, 40 and 41 to queue 1.
console(config)# qos map dscp-queue 33 40 41 to 1
qos map dscp-dp
Use the qos map dscp-dp Global Configuration mode command to map the
DSCP values to Drop Precedence. Use the no form of this command to
restore the default configuration.
DSCP value 0 1-8 9-15 16,24,40,
48-63
17-23 25-31 33-39 32,41-47
Queue-ID 2 1 3 7 4 5 6 8