Dell PowerEdge VRTX - Manual (Page 551)

VLAN Commands 551
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\VLAN.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
console(config-if)# switchport general ingress-filtering
disable
switchport general acceptable-frame-type
The switchport general acceptable-frame-type Interface Configuration mode
command configures the types of packets (tagged/untagged) that are filtered
(discarded) on the interface. Use the no form of this command to return
ingress filtering to the default.
Syntax
switchport general acceptable-frame-type {tagged-only | untagged-only |
all}
no switchport general acceptable-frame-type
Parameters
• tagged-only—Ignore (discard) untagged packets and priority-tagged
packets.
• untagged-only—Ignore (discard) VLAN-tagged packets (not including
priority-tagged packets)
• all—Do not discard packets untagged or priority-tagged packets.
Default Configuration
All frame types are accepted at ingress (all).
Command Mode
Interface (Ethernet, Port Channel) Configuration mode
Example
The following example configures port gi0/3 to be in general mode and to
discard untagged frames at ingress.
console(config)# interface gi0/3
console(config-if)# switchport mode general
console(config-if)# switchport general acceptable-frame-type
tagged-only