Dell PowerEdge VRTX - Manual (Page 331)

802.1X Commands 331
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\802_1X.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
dot1x guest-vlan timeout
Use the dot1x guest-vlan timeout Global Configuration mode command to
set the time delay between enabling 802.1X (or port up) and adding a port to
the guest VLAN. Use the no form of this command to restore the default
configuration.
Syntax
dot1x guest-vlan timeout timeout
no dot1x guest-vlan timeout
Parameters
• timeout —Specifies the time delay in seconds between enabling 802.1X (or
port up) and adding the port to the guest VLAN. (Range: 30–180).
Default Configuration
The guest VLAN is applied immediately.
Command Mode
Global Configuration mode
User Guidelines
This command is relevant if the guest VLAN is enabled on the port.
Configuring the timeout adds a delay from enabling 802.1X (or port up) to
the time the device adds the port to the guest VLAN.
Example
The following example sets the delay between enabling 802.1X and adding a
port to a guest VLAN to 60 seconds.
console(config)# dot1x guest-vlan timeout 60