Dell PowerEdge VRTX - Manual (Page 567)

VLAN Commands 567
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\VLAN.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
150 primary gi0/1
150 151 isolated gi0/2
160 primary gi0/3
160 161 community gi0/4
console# show vlan private-vlan 150
Primary Secondary Type Ports
----------- ----------- ----------- ----------------------
150 primary gi0/1
150 151 isolated gi0/4
switchport access multicast-tv vlan
Use the switchport access multicast-tv vlan Interface Configuration mode
command to enable receiving Multicast transmissions on an interface that is
not the access port VLAN, while keeping the L2 segregation with subscribers
on different access port VLANs. Use the no form of this command to disable
receiving Multicast transmissions.
Syntax
switchport access multicast-tv vlan vlan-id
no switchport access multicast-tv vlan
Parameters
• vlan-id —Specifies the Multicast TV VLAN ID.
Default Configuration
Receiving Multicast transmissions is disabled.
Command Mode
Interface (Ethernet, Port Channel) Configuration mode
User Guidelines
The user cannot transmit Multicast transmissions on the Multicast TV
VLAN.