Dell PowerEdge VRTX - Manual (Page 341)

802.1X Commands 341
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\802_1X.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Example 2. This example enables user-based VLAN assignment. If the
RADIUS server authorized the supplicant but did not provide a supplicant
VLAN, the supplicant is accepted and the static VLAN configurations is used.
console(config)# interface gi0/1
console(config-if)# dot1x radius-attributes static
console(config-if)# exit
dot1x re-authenticate
The dot1x re-authenticate Privileged EXEC mode command manually
initiates re-authentication of all 802.1X-enabled ports or the specified 802.1X-
enabled port.
Syntax
dot1x re-authenticate [ interface-id ]
Parameters
• interface-id —Specifies an Ethernet port.
Default Configuration
If no port is specified, command is applied to all ports.
Command Mode
Privileged EXEC mode
Example
The following command manually initiates re-authentication of 802.1X-
enabled gi0/1:
console# dot1x re-authenticate gi0/1