Dell PowerEdge VRTX - Manual (Page 57)

User Interface Commands 57
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\User_Interface.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
User Guidelines
By default, a More prompt is displayed when the output contains more than
24 lines. Pressing the Enter key displays the next line; pressing the Spacebar
displays the next screen of output.
The terminal datadump command enables dumping all output immediately
after entering the show command by removing the pause.
The width is not limited, and the width of the line being printed on the
terminal is based on the terminal itself.
This command is relevant only for the current session.
Example
The following example dumps all output immediately after entering a show
command.
console# terminal datadump
terminal width
Use the terminal width User EXEC mode command to determine the width
of the display for the echo input to CLI sessions. Use terminal no width to
return to the default.
The command is per session and will not be saved in the configuration
database.
Syntax
terminal width number-of-characters
terminal no width
Parameters
number-of-characters - Specifies the number of characters to be displayed for
the echo output of the CLI commands and the configuration file,'0' means
endless number of characters on a screen line. (Range: 0, 70-512)
Default Configuration
The default number of characters is 77.